Detailed Costing on-line, in Private - Support:Toll-free 1300 876 778
HomeTestimonialsCheck ListF.A.Q.ConstructionCost consider'nsInstall ManualSupportView CartSearch

Cabinets-onLine
- Floor (Base) Corner


Corner Base Cabinet - ANGLED back - Laminate  - Your Dimensions

Price:





QTY:
Height 400 - 1200mm

LH Width to 1000mm

RH Width to 1000mm

LH Depth

RH Depth

LH Corner-cut away in mm

RH Corner-cut away in mm

Number of shelves required

Shelves

Shelf Depth

Bifold door hang

Special requests


        
Corner Base Cabinet - ANGLED back - Laminate - Your Dimensions

Floor Corner unit Cut Corner unit

Floor Corner Cabinet for Bi-fold door

Floor corner cabinet kitset cabinetry  include a solid left & right back, bottom, left & right ends (gables), two top rails and shelf(s). The bottom shelf is  pre-drilled to accept the knock-in style plastic legs. The shaped shelves have there exposed edges finished in a “T-mould” or melamine edge.

The shelf is set back by 85mm from the front of the box.

See also the “ General Construction” page.

Products have either a straight or angled back corner. Carcass is made from HMR 16mm PB.

Warning:  When designing the cabinet dimensions please ensure Bifold door width is not greater than 600mm.
Corner cabinet measurements.gif

Maximum and Minimum Door Sizes:
The 3 basic rules to follow have to do with the sizing of the bi-fold doors.
        Rule 1: The minimum size of either individual door (single door) is 220mm.
        Rule 2: The maximum size of either individual door (single door) is 430mm.
        Rule 3: The maximum combined door size (Left door + Right door) is 650mm.
                Tip: The ideal combined door size (Left door + Right door) is between 550mm and 600mm

Here is a quick 'How to' working example of finding out wether the Door sizes are no problems on a custom sized cabinet:

Assume from your design, you have worked out that you need the following custom corner cabinet size:
        Left Width = 852mm
        Right Width = 875mm
        Left Depth = 480mm
        Right Depth = 580mm

Now you need to test it to see if it's O.K:

Test 1: Left Width 852mm minus Right Depth 580mm = Left Door Size of 270mm.
        272mm is greater than the Min. size of 220 and less than the max. size of 430mm, so this is O.K.
Test 2: Right Width 875mm minus Left Depth 480mm = Right Door Size of 295mm.
        295mm is greater than the Min. size of 220 and less than the max. size of 430mm, so this is O.K.
Test 3: The combined bi-fold door size is Left Door 272mm plus Right Door 295mm = 567mm
        567mm is less than the Max. combined door size of 650mm.
        Also, 567mm is greater than the ideal Min. size of 550 and less than the ideal max. size of 600mm, so this is perfect.

Note: Altering any one of the 4 sizes above alters the outcome of the door sizes, so if you change the size at any stage remember to do the simple 3 test rule above.

Our system also has a built-in checker to test the Corner cabinet using these simple rules but it just returns a message and not a 'how to'. If you really must have a size and it fails the 3 test rule above, then put in the size that the computer accepts for the product and use the 'Special requests' box to over-ride the size to a size that you must have, i.e.: "Over-ride Left Depth to 672mm -I must have this".

Please overwrite the default values shown in the Prompt Boxes with your specific values and a calculated price will be shown on the Shopping Cart (see label "ViewCart" above.

Height = Box Height Only (this does not include height of the Kickboard or the thickness of the bench top).
    Example: If a 900mm High Over-all Bench height is desired:
      900mm – Bench Top thickness (E.G.: 34mm) – Kickboard Height (E.G.: 146mm) = Cabinet Height 720mm.

LH Width & RH Width= the external width along the back-wall, each of which to fit in the price range.

LH Depth & = External Depth of Cabinets including Door

Number of shelves required= Specify the number needed from 0-7 - the standard (in this case 1x Shelf).

Shelves = is to indicate Fixed or Adjustable shelving.

Shelf Depth = Offset (Set in) of Shelf from the Door. Select either the suggested value as a default, Full depth of the cabinet, or one of the other options.

Bifold door hang=" Select Right, Left or None as required.

"Special Requests" can be used to: (for example) state you preferred Door Gap measure e.g. 1mm (in place of our standard 1.5mm); or any other need e.g. 'No shelf holes to be drilled'.

When you [CLICK] on the "Add To Cart" button the Product specifications are listed on a 'Shopping List' ("Shopping Cart")
Only when you are ready and the Items have been validated for consistency on YOUR PC will you be prompted to submit your personal details and the contents of the shopping cart to the central system to obtain a QUOTE , a possible shipment date and a request for a small deposit.
Your data will be stored for some 12 days on your PC to allow easy order specification and amendment. 

Use button to return to the Product Page.





Shopping cart software
and credit card processing provided by ezimerchant