Flat pack kitchens & cabinets Australia logo

Custom sized cabinets.
Support:Toll-free 1300 876 778 or support@cabinetsondemand.com.au

- Corner/ Walk-in Pantry



Diagonal Corner Walk-in Pantry 2xDoor 900mm

 

Diagonal Corner - Walkin Pantry cabinets,  
with 5 shelves standard and 4 - 5 hinges for each door.

This pantry includes a Door, solid back, top, left & right ends (gables) and shelves. It has no bottom shelf (hence you can 'Walk-in') unless requested in the 'Special requests', It's designed to sit directly on the floor (no Kickboard required). and the door is set-up 5mm from the bottom so that it doesn't bind on the floor when opened (this distance can be changed by you if required, just mention the distance off the floor required in the 'Special requests' box). The carcase is all made from 16mm thick White High Moisture Resistant Particleboard, whereas the Door is made from the material selected.

See the
General Construction page on this web site for further, more detailed construction details.

Select from one of the Material / Style Sub-category options above to get a Product range by Width.

For a description of these SIX different STYLES please see Colour & Profiles consideraions

The unit include a Top and all Hardware for assembly, Door(s), Legs and Hinges are included - Handles excluded (but see: Handles)

Please overwrite the default values shown in the Prompt Boxes with your specific values and a new calculated price will be shown on the Shopping Cart (see label "ViewCart" above.

Height = Box Height Only (this does not include height of the Adjustable Legs/Kickboard or the thickness of the bench top).
    Example: If a 900mm High over-all Bench height is desired:
      900mm Bench Top thickness (E.G.: 34mm) Kickboard Height (E.G.: 146mm) = Cabinet Height 720mm.

Width = Outside Width of the Carcase (Cabinet) - excluding any Coloured Panels that may be required to be screwed on later.

A Width exceeding 1000mm is not recommended for storage of heavy foodcontainers, fixed Shelving and/or a central divider helps to overcome possible sagging of a shelf under very heavy load.

Depth = Outside Depth of the Cabinets including the thickness of the Door (or Drawer Front) 

Shelf(s) Required = Specify number of shelves required from 0 -7. Normally ONE for Cabinets < 750mm and 5-6 for Pantry cabinets. Cabinet price is adjusted for number specified.

Shelves = Choose between either Fixed or Adjustable type shelving.

Shelf Depth: [?]= Identifies if the Shelf is Set-in from the front, the Default is set to 125mm for Walk-in Pantry cabinets. To modify - Select one of the options.

Door Hang=" Select Right, Left or None as required. 

Soft Close?  = Special Soft Close Hinges can be used, at a extra cost of $6.00 per hinge, or $12 per Door < 900mm in Height. Greater Height needs more hinges, up to 5 for >2100mm

Push to Open mechanism  = Instead of using door handles this mechanism will open the door after a good push- extra cost is $25 per Door

Door Style - Material Finish

              • Carcass (Plain White Melamine) - 16mm thick High Mositure Resistant (HMR) particle board;
              • Laminate (Melamine) - 16mm thick Coloured ;
              • GLOSS Laminate (Formica) - 16mm thick;
              • Unfinished - 16mm Craftwood (MDF) -  with a range of Face and Edge profiles - ready for DIY painting;
              • Belmont (Vinyl Wrap - TEXTURE finish) -  18mm thick with a range of Face and Edge profiles ;
              • Byron Bay (Vinyl Wrap - GLOSS finish) - 18mm thick with a range of Face and Edge profiles ;
              • Albany (Polyurethane painted - TEXTURE finish) -  18mm thick with a range of Face and Edge profiles ;
              • Avoca (Polyurethane painted - GLOSS finish) - 18mm thick with a range of Face and Edge profiles. 
  •                  For a more detailed description of these  different STYLES and Price considerations please see:  Cost Considerations.

    At the end of all your product ordering you MUST specify (using STEP 5: Colours & Profiles) your choice of Colour and Finish; you must have a colour choice for each product Style selected - the colour can either apply to one of: Doors & Drawers, Panels or Kickboards, or ALL of these.

    You can mix different Product styles in an order, for example Painted Doors with Vinyl Wrap Panels, each with its own Colour and Profile- BUT if you want different colours for different products in a particular Style (for example Doors are specified In Beige, but you want Drawers in Light Green) then you should make a separate Order for these. (and let us know so we can ensure correct Discount calculations over both Orders.)

"Special Requests" can be used to: (for example) state you preferred Door Gap measure e.g. 1mm (in place of our standard 1.5mm); or any other need e.g. 'No shelf holes to be drilled'.

"Your Reference" is any reference you may want to make, for example to your Design Sketch/Drawing. 

When you [CLICK] on the "Add To Quote" button the Product specifications are listed on a 'Shopping List' ( "Shopping Cart")  that identifies all Products that you have selected for a "Final Quote" from the Production Manager.

Only when you are ready and the Items have been validated for consistency on YOUR PC will you be prompted to submit your personal details and the contents of the shopping cart to the central system for a final QUOTE.
Your data will be stored for some 12 days on your PC to allow easy order specification.

Use button to return to the Product Page




QTY:
Height to 2350mm

LH Width to 1000mm

RH Width to 1000mm

LH Depth in mm

RH Depth in mm

Shelf(s) required?

Shelves

Shelf Depth

Hinge Type

Door Style - Material finish

Your Reference

Special requests

Return to Last Menu-->

For Main Menu ------->

Return to Home Page-->

View[Shopping]Cart---> © Flat Pack Cabinets Since 2004